Whiteboard (Bluetooth) For best results, plug the Bluetooth adapter into the computer *before* turning it on. It’s also best to use the same USB port each time so that Windows doesn’t have to install drivers on every boot up.

This also helps our Device Manager more quickly detect the presence of Bluetooth (if our DM starts before drivers are loaded, it will need to be restarted once the Bluetooth adapter finishes installing). Systran 6 Premium Translator Serial Key. Whiteboard (Bluetooth and RF) Although you don’t need to calibrate the board each time you boot up the computer, it is always a good idea to go into the Device Manager prior to launching Workspace to make sure the board is connected with a green checkmark displayed. A very easy way to verify the connection is to “beep” the board. This can be done by highlighting the board in the Device Manager, then click on the speaker icon in the row above the displayed devices. If the board is connected, it will beep once.

Overview This article will cover how to use the InterWrite interactive white board, associated software and peripherals. Please note there are two different types of.

Dualboards This is something that won’t come up too often at this point, but it’s good to know. Periodically we release firmware updates for both the board and the receiver. The Dualboard’s firmware can be updated by connecting it directly to the computer using a USB cable. Then in Device Manager, click File then Preferences. You’ll see a Firmware Update tab. Clicking “Check for Updates” will tell you if there are any updates available for connected hardware. Workspace In order to get the content database file built to the local hard drive, perform the following steps: 1.

Install Workspace and Content. BEFORE launching Workspace, go to My Documents, right click on Interwrite Content Gallery folder and select copy. Navigate to C: Program Files, right click on eInstruction folder and select Paste. Launch Workspace and go into Preferences 5.

Under Options tab the first section is User Selectable Folders. Click on User Gallery Database Folder and click Browse. Navigate to C: Program Files eInstruction and click on Interwrite Content Gallery folder.

Click OK to exit Preferences. Restart Workspace. At this time, the gallery can be built and it should save the.eig file to the eInstruction folder on the C: drive. Also, if Workspace isn’t going to be used for any appreciable amount of time in a particular classroom, close the program. This will help keep resources free and will stop Workspace from consuming resources that may be needed elsewhere.